Add to Cart
PC6811
Description
PC film is short for Polycarbonate film. It is an amorphous, odorless, non-toxic, highly transparent colorless or slightly yellow thermoplastic engineering plastic.
Advantage
It has excellent physical and mechanical properties, especially excellent impact resistance, high tensile strength, bending strength and compression strength; has good heat resistance and low temperature resistance, and has stable mechanical properties and dimensions in a wide temperature range Stability, electrical properties and flame resistance, can be used for a long time at -60 ~ 120 ℃; no obvious melting point, in the molten state at 220-230 ℃; rigidity, resin melt viscosity is large; water absorption rate is small, shrinkage rate is small , Small creep, high dimensional accuracy, good dimensional stability, small film permeability; self-extinguishing material; stable to light, but not resistant to ultraviolet light, good weather resistance; oil and acid resistant.
Specification
Code | Thickness (mm) |
Width*Length (mm*m)
| Foot*Foot | Kg/roll | Pound/R | R/PIt |
PC6811 Film | 0.125 | 930*400 | 3’*1312’ | 55.8 | 128 | 6 |
0.175 | 930*350 | 3’*1148’ | 68.4 | 150.7 | 6 | |
0.2 | 930*325 | 3’*1066’ | 72.3 | 159 | 6 | |
0.25 | 930*300 | 3’*984’ | 83.7 | 184.5 | 6 | |
0.3 | 930*250 | 3’*820’ | 83.7 | 184.5 | 6 | |
0.375 | 930*200 | 3’*656’ | 83.7 | 184.5 | 6 | |
0.5 | 930*150 | 3’*492’ | 83.7 | 184.5 | 6 |
Application:
Widely used in such as: the hat, sunglass, windows, aviation sheet, lighting, electroplating, vacuum forming, dyeing, etc.